DIY Tray

For one of my home decor projects I decided to make my own tray. These things usually run pretty expensive, at least for the ones that I liked so I decided to make my own. Though my total ran up pretty high, money-wise, a lot of the things I purchased will be used again for other projects down the road since I had a lot left over. Not to mention, I used my coupons from the craft stores.

The supplies I used:

• Plain wooden tray from Hobby Lobby
• Tile Adhesive from Hobby Lobby
• Sealant from Hobby Lobby
• Tile from Lowes 
• Grout from Lowes 
• Grouting tools from Hobby Lobby
• Sponge Brush
• Paper Towel
• Stain from Micheal's  - optional 

The picture above is the sheet of tiles I bought for about $5 per sheet. I bought two because I plan on making something else with the tiles. I just went for the cheaper variety since this was the first time I've done this.

I arranged the tiles on the plain wooden tray to make sure that they fit. And I had to figure out what kind of pattern worked with what I had. It didn't take long for me to figure out what I wanted to do with them but it is important that you lay out your tile first before you set them.

Next I set the tile using the tile adhesive. I'm sure you could use something else since this is your own project but I decided to get it to see how it set. I used less than a fourth of the bottle so I have plenty tile adhesive leftover for several more projects. Once everything was glued down, everything has to set for about 5 hours, so I just left it over night to dry and cure.

The next day, I did the grout. It was as simple as it got. Just follow the direction on the package and you'll be fine. Make sure to fill in the cracks. I had to let it set before I was able to wipe off what collected on the top.

The difference the grout makes is ridiculous. I wasn't looking to make everything perfect and even but the grout certain took away some of the imperfections. This is what it looked like right after I used the sponge to take off whatever collected on the top of the tiles. Once that was finished, I waited 24 hours before I moved on to the next step. 

Once it set, the tray became sturdy.

Next I stained it. This stain was expensive and I wouldn't have bought it if I didn't have a 50% off coupon at Micheal's. I hardly used any of it on this little project and I plan on using it later for other things I have in mind. Anyway, I taped the edges of the tray so it wouldn't get on the tile and used a brush to apply it. Well, after I cleaned it off and sanded it.

When the stain was applied and it set for an hour, I went ahead and applied the seal to the grout. This stuff is a pain to get off tile after it sets so it is best to try to wipe it off before it starts to set. It was fine on the stone pieces. I didn't wipe it off of those because it didn't take away from them.

When everything was dry/set, this became the finished result. Now, I just need to make some matching coasters to go with it.

With the coupons, I spent about $35. How much material I used on the tray cost about $16. As I said before, a lot of these supplies are going to be used for later projects.